Eski 23-05-04, 00:39 #1
MAFIA MAFIA çevrimdışı
Varsayılan Fujitsu MHM22ooAT Formatter

Fujitsu MHM22ooAT hard dısk ıcın formatter arıorum bad sector var
fabrıka ayarlarına hdd yı sıfırlayan programı arıorum yardımcı olanlara sımdıden tessekkurler.
Fdısk yaptım
Format atacam formatta Format Hazır deıl sonladırıldı dıo yuzde 4 de
  Alıntı Yaparak CevaplaAlıntı Yaparak Cevapla
Eski 23-05-04, 10:20 #2
horde_1 horde_1 çevrimdışı
Varsayılan Cvp: Fujitsu MHM22ooAT Formatter

http://www.myung.co.kr/bbs/mitboard/...ca2500a0d19773


sayfada diagnostic test yapan bir program var indirdim deneyemedim ama
zerofill aracı icin de varmı bi bakacam serviste uygun bi makina bulmam lazım
bu gunde pazar eğer sen dene ye bilirsen adres yukarda araştırmaya devam tabii

busayfa ye ni bura daki diagnostiği dene bir istersen diğer firmaların var bunun bulması nekadar zormuş
http://www.fujitsu.ca/support/hdd/download.html

Mesajı son düzenleyen horde_1 ( 23-05-04 - 10:55 )
  Alıntı Yaparak CevaplaAlıntı Yaparak Cevapla
Eski 23-05-04, 10:27 #3
MAFIA MAFIA çevrimdışı
Varsayılan Cvp: Fujitsu MHM22ooAT Formatter

Hoca denıycem ellerın dert gormesın
Read me sı burda okudum bıraz denıycem sımdı
//************************************************** *************'\\

FJDT ver 6.11
Copyright (c) 1999-2003 Fujitsu Limited. All Rights Reserved.


\\************************************************ ***************/

July 17, 2003

This file contains immediate information for use with the FJDT ver. 6.11

---------------------
DISCLAIMER
---------------------

The FJDT ver. 6.11 is provided "as is" without any
warranty of any kind, either expressed or implied, including, but not
limited to, the implied warranties of merchantability and fitness for
a particular purpose. The entire risk as to the quality and performance
of the program is with you. In no event will FUJITSU LIMITED or any of
its subsidiaries be liable to you for any damages, including any general,
special, incidental or consequential damages arising out of the use or
inability to use this program ( including but not limited to any loss of
profit or savings, loss of data or a failure of the program to operate
with any other programs), even if FUJITSU LIMITED or any of its
subsidiaries has been advised of the possibility of such damages.


__________________________________________________ _______________________

---------------------
Version History
---------------------
Version 1.14 - Date: September 1, 1999
- Support for PB14 and HN12 models.

Version 1.20 - Date: January 22, 2000
- Support for PB15/15H drive models.

Version 2.05 - Date: April 28, 2000
- Support for HN13/13L drive models.

Version 3.00 - Date: July 14, 2000
- Support for PB16 series drive models.

Version 4.00 - Date: March 5, 2001
- Support for HN14L drive model.

Version 5.00 - Date: July 31, 2001
- Support for PB17H/HN15L drive models.

Version 6.01 - Date: May 21, 2002
- Support for HN16L drive model.

Version 6.10 - Date: Jan 31, 2003
- Support for V-40 drive model.

Version 6.11 - Date: Jul 17, 2003
- Fix the following bug.
When an error occurs during "Media Scan",
the calculation of the next sector is wrong.

*** IMPORTANT NOTE ***

Program versions other than the ones listed above is considered to
be an unofficial release or beta version. Please always update your
copy and use the latest official release/version.

__________________________________________________ _______________________


-------------------
CONTENTS:
-------------------

1) About the program
2) File size and build time
3) User's Guide ( Note: Please read this part before using the program )
4) Test sequences/schedules
5) Test results
6) Contact Info.

- o - o - o -


---------------------------------------
1. ABOUT THE PROGRAM
---------------------------------------
FJDT ver. 6.11 is provided for use in checking FUJITSU IDE drives for possible
defects/problems at the user side.
This program version only works with the following FUJITSU IDE drive models:

2.5 inch drives:
-----------------
{ "FUJITSU M271xT" }
{ "FUJITSU M272xTA" }
{ "FUJITSU MHA20xxAT" }
{ "FUJITSU MHC20xxAT" }
{ "FUJITSU MHD20xxAT" }
{ "FUJITSU MHE20xxAT" }
{ "FUJITSU MHF20xxAT" }
{ "FUJITSU MHG21xxAT" }
{ "FUJITSU MHH20xxAT" }
{ "FUJITSU MHJ2xxxAT" }
{ "FUJITSU MHK2xxxAT" }
{ "FUJITSU MHL2xxxAT" }
{ "FUJITSU MHM2xxxAT" }
{ "FUJITSU MHN2xxxAT" }
{ "FUJITSU MHR2xxxAT" }
{ "FUJITSU MHS2xxxAT" }
{ "FUJITSU MHT2xxxAT" }

3.5 inch drives:
-----------------
{ "FUJITSU M16xxTAU" }
{ "FUJITSU MPA3xxxAT" }
{ "FUJITSU MPB30xxATU E" }
{ "FUJITSU MPB30xxAT" }
{ "FUJITSU MPC3xxxAT" }
{ "FUJITSU MPC3065AH" }
{ "FUJITSU MPD3xxxAT" }
{ "FUJITSU MPE3xxxAT" }
{ "FUJITSU MPF3xxxAT" }
{ "FUJITSU MPF3xxxAH" }
{ "FUJITSU MPG3xxxxxxx" }
{ "FUJITSU MPH3xxxAH" }


--------------------------------------------
2. FILE SIZE and BUILD TIME
--------------------------------------------

To ensure correct operations, please check if your copy of the
program conforms with the following specifications:

File Size : 201, 522 Bytes
Build Time : 07-17-03 9:04 am


--------------------------------------------
3. USER'S GUIDE
--------------------------------------------

3.1. Requirement

a) Operating System : DOS

* This version has only been tested from DOS 5.0 above

b) CPU: IBM-PC compatibles -> 80x86 CPU-Based motherboards


3.2. Running the program

*Note: You cannot run this program under WINDOWS environment.

3.2.1. Boot from a clean DOS disk.
3.2.2. Change to the drive/directory where FJDT.EXE is located.
3.2.3. Syntax:
A> FJDT


--------------------------------------------
4. TEST SEQUENCES/SCHEDULES
--------------------------------------------

FJDT ver. 6.11 runs the following test sequence on attached or selected
IDE device.

Note: Comprehensive Test is performed only when the drive passed the Quick Test.

I. Quick Test

a) Pre-SMART Check

b) Buffer Write/Read Test

c) Media Scan for Outer Area (LBA first 150MB)

d) Media Scan for Inner Area (LBA last 50MB)

e) Fundamental Seek Test (Random Seek and Random Read)

f) Post-SMART Check

II. Comprehensive Test

a) Media Scan for All Area

b) Post-SMART Check


--------------------------------------------
5. TEST RESULTS
--------------------------------------------

After performing FJDT tests, the program will display PASS or FAIL and result_code.


--------------------------------------------
6. CONTACT INFO
--------------------------------------------

For technical support, you may contact your nearest FUJITSU local distributor.
  Alıntı Yaparak CevaplaAlıntı Yaparak Cevapla
Eski 23-05-04, 10:31 #4
MAFIA MAFIA çevrimdışı
Varsayılan Cvp: Fujitsu MHM22ooAT Formatter

Gırdım Programa
THE DRIVE DID NOT PASS THE QUICK TEST AN ERROR WAS DETECTED ON THE HDD
ERROR CODE : A106M5
Please CONTECT fujıtsu Customer Servıce For repaır yazıo


edit
hoca erase tool u buldum denıorum
ınsallah olr allah rzı olsun

Mesajı son düzenleyen Mafia ( 23-05-04 - 10:40 )
  Alıntı Yaparak CevaplaAlıntı Yaparak Cevapla
Cevapla

Bu konunun kısa yolunu aşağıdaki sitelere ekleyebilirsiniz

Konu Araçları

Gönderme Kuralları
Yeni konu açamazsınız
Cevap yazamazsınız
Dosya gönderemezsiniz
Mesajlarınızı düzenleyemezsiniz

BB code is Açık
Smiley Açık
[IMG] kodu Açık
HTML kodu Kapalı



Tüm saatler GMT +3. Şuan saat: 16:36
(Türkiye için artık GMT +3 seçilmelidir.)

 
5651 sayılı yasaya göre forumumuzdaki mesajlardan doğabilecek her türlü sorumluluk yazan kullanıcılara aittir. Şikayet Mailimiz. İçerik, Yer Sağlayıcı Bilgilerimiz. Tatil